This is what you have been waiting for!  Our 4 post in a side by side version!

Early adopter program, get on board and save.

Normally $7900, but receive $400 off this double wide 4 post hoist in our early adopter program. 

GST INCLUSIVE AND COMES WITH A FIVE YEAR STRUCTURAL WARRANTY.

The happ26 includes 6 drip trays to protect the underneath cars, complimentary, and 2 heavy duty tool trays which can either hold your tools between the runways, or be the base if you want to use your own standard bottle jack to lift. We also sell both the hand pump model and air pneumatic jacking beams – mini scissor lifts which are the same as those supplied on HAPP25 lifts.

In addition to above, features are:

• Large 12.5mm lift cables as used on our 5T hoist
• Dual 90x60mm extra strength beams under each runway per engineer review
• 5 mm ultra thick columns – thicker than australian engineer requirements
• Cable and hydraulic load balancing
• Automatic safety locks
• Plastic powder coat finish
• Release all column safeties , raise and lower from single point
• Ratchet safety at with 130mm increments
• Max runway height 2000m, runway thickness 100mm, 1.9m clearance under the runways
• Runways move synchronously
• Hydraulic cylinder – cable drive, stable lifting and lowering
• Designed and Tested to Australian Standards with know steel grades and thicknesses
• Designed and Tested for Australian Standards deflection at Safe working load
• Steel lock pins for extra safety when storing cars at full height for extended periods
• Tru-bolts included with hoist, drop in anchor bolts can be used for easy moving hoist available at your local bolt shop
• Connector to external limit switch (HAPP can supply you with limit switches if you plan to set them up)
• Aluminium ramps to make removal easier

Other items to consider are :

• All lifts are inspected TWICE by external quality assurance engineers during the production assembly.
• All pulleys have ball bearing centres for regular workshop use
• Our steel columns are 5mm which is thicker than what is required by WH&S.  All other companies are only at 4mm or maybe less.
• We have included TWO extra strengthening beams under EACH runway  and on cross beams per Australian Standards
• We have TRIPLE safety mechanisms as required by the latest Australian Standards testing.
• Our locking mechanisms are every 130mm, not every 150mm like other companies.
• Our cables are 12.5mm thick all steel construction. They have been tested against Australian Standards requirements in NATA registered laboratories in Australia and exceed the Australian Standards requirements.
• 5 year structural warranty , 12 month manufacturer parts warranty see happ.com.au/warranty

Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.