Hoist HAPP28 4T Four Post triple stack car storage lift – Early Adopter

This is what you have been waiting for!  Our 4 post in triple stack version!

Triple your space utilization, park 3 cars where you would normally park one car.

HAPP dual runway controls design enable you to operate each platfrom independantly. You effectively have two four post hoists in the one spot where you can set the lift of each vehicle to  suit your needs.

Early adopter program, get on board and save.

Normally $15,000, but receive $1500 off this double wide 4 post hoist in our early adopter program. 

GST INCLUSIVE AND COMES WITH A FIVE YEAR STRUCTURAL WARRANTY.

The happ28 includes 6 drip trays complimentary, and a tool tray for working on the lower which can either hold your tools between the runways, or be the base if you want to use your own standard bottle jack to lift. We also sell both the hand pump model and air pneumatic jacking beams – mini scissor lifts which are the same as those supplied on HAPP25 lifts.

Features are:

• Large 12.5mm lift cables as used on our 5T hoist
• Dual 90x60mm extra strength beams under each runway per engineer review
• 5 mm ultra thick columns – thicker than australian engineer requirements
• Cable and hydraulic load balancing
• Automatic safety locks
• Plastic powder coat finish
• Release all column safeties , raise and lower from single point
• Ratchet safety at with 130mm increments
• Max runway height 3700mm / 1900mm, runway thickness approx 100mm
• Platforms move independantly allowing you operate as two seperate 4 post lifts.
• Hydraulic cylinder – cable drive, stable lifting and lowering
• Designed to Australian Standards with known steel grades and thicknesses
• Designed for Australian Standards deflection at Safe working load
• Drip trays provided to protect cars underneath
• Huge heavy duty part tray provided standard
• Tru-bolts included with hoist, drop in anchor bolts can be used for easy moving hoist available at your local bolt shop
• Aluminium ramps to make removal easier

Other items to consider are :

• All lifts are inspected TWICE by external quality assurance engineers during the production assembly.
• All pulleys have ball bearing centres for regular workshop use
• Our steel columns are 5mm which is thicker than what is required by WH&S.  All other companies are only at 4mm or maybe less.
• We have included TWO extra strengthening beams under EACH runway  and on cross beams per Australian Standards
• We have TRIPLE safety mechanisms as required by the latest Australian Standards testing.
• Our locking mechanisms are every 130mm, not every 150mm like other companies.
• Our cables are 12.5mm thick all steel construction. They have been tested against Australian Standards requirements in NATA registered laboratories in Australia and exceed the Australian Standards requirements.
• 5 year structural warranty , 12 month manufacturer parts warranty see happ.com.au/warranty

Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.