MC30-1

MC30 Long Motorcycle Lift (Copy)

$860.00

Wider and longer for the largest bikes. For the larger Harleys and modified bikes.

Options

CS20 centre lift jack

The CS20 centre lift stand is typically used with the HAPP motorcycle lifts where support for the bike from the centre is required. Bikes can be lifted by frame rails or with a flat loading platform

SKU: MC30-1 Categories: , ,

GST INCLUSIVE AND COMES WITH A ONE YEAR WARRANTY.

We have ridden road and dirt bikes for over 50yrs, we know what a good bike lift in Australia should have.

When selecting your motorbike lift, measure the wheelbase of your longest bike and add half of the front wheel diameter to this measurement.

The table length of the HAPPMC 30 lift is 2200mm, your bikes length axle to axle length should be this length or preferably shorter. People with Harleys typically go for this model.

You can use side stands, centre stands and tie-downs to locate your bike on the lift.

HAPP features are

  • Unique to HAPP is the front extra wide adjustable tie down supports that allow the bike to be held firmly like you would do on a motorbike trailer providing unrivalled stability and ease of access to the bike.
  • RHS scissor mechanism, unique for this price range providing structural stability to the lift not achievable by systems with the L shaped steel.
  • Loading ramp is purposefully narrower than the lift so you can maintain footing as the bike loads onto the ramp.
  • Table has a removeable rear section to make rear wheel removal easier, a custom made clamp to stabilise the front wheel (it is not meant to hold the bike, use tie down straps or centre stands for that).
  • Operation is by BOTH AIR AND MANUAL
  • Edges are curved upwards to stop parts etc falling off
  • Front wheels can be secured with screw down locks
  • Lighter bikes can be moved around on the bike lift
  • 2 safety lock positions one at full height and the other at mid rise.

Paddock stands (HAPP PS10 and PS20) are useful for locating road bikes on lifts, centre lift stands (HAPP CS20 and CS10) work well for lifting open frame bikes and dirt bikes.

Call 0439 833497 or email customerservice@happ.com.au to discuss details and pricing. You can inspect these items at our showroom in Willow Vale prior to buying.

 

People who purchased our bike lifts also buy

  • CS10 – dirt bike centre stand
  • CS20 – road bike scissor centre stand
  • PS 10 – paddock stand – front
  • PS20 – paddock stand – rear
  • MCWB10 – Motorcycle wheel balancer
  • MCTC10 – Tyre changer bead breaker

If you like one, pay for it and take one home on the spot.

See also other Happ models,

  • MC 20 – 1800mm table for small bikes,
  • MC 25 – 2000mm table for Harleys,
  • MC 40 200mm table with removeable side tables for bikes, quads and mowers.
  • MC 35  coming soon with 2200mm table, electric – hydraulic operation and auto click in wheel clamp.
Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


Couldn’t be happier with my HAPP40 clear floor hoist. It was very well packaged and the installation was very simple. The instructions are very well written and logically set out. The finish of these hoists are as good as any other that is 3 times the... HAPP40 – Clear floor, single point release 4T hoist – Karl Rickards – May 13, 2013



We were looking at buying some hoists for our workshop & found the HAPP 4.5T 2 Post Hoist (HAPP45Pi) design & quality to be on par with that of the $8K Rotary SPOA10 hoists - the arm design was also very similar to that of the Rotary, so for a ... Happ45Pi 2 post hoist, tyre machines and shop press – Chillin Automotive, Sep 2022


Read More Reviews

Weight 169 kg
Dimensions 228 × 80 × 30 cm
Manual and air pneumatic (air)

Yes

Capacity:

800 LB / 450 Kg

Min Height:

180 mm

Max Height:

780 mm

Table Size:

2200 x 680 mm

Ramp Size

600 x 680 mm

Net Weight:

141 Kg

Gross Weight:

169 Kg

Package Size:

2280 x 700 x 680 mm

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


I selected a HAPP 35 hoist sight unseen from an ad on Gumtree. From the outset I was delighted with the professional way in which the people at HAPP followed up on my enquiry.As a lecturer in engineering, I was impressed with the design and quality of... HAPP35 – floor plate hoist – Ron Sushames – December 22, 2013



Fantastic, amazing customer service all round. I will highly recommend HAPP to anyone after a hoist  HAPP60 – clear floor hoist – Chris Fitzgerald – May 27, 2018


Read More Reviews

  • We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.
  • We sell mainly by recommendation. To do this we  have personal and professional customer service;  we work with every customer to make sure they are happy with the products they purchase.
  • Imported products are typically assembled overseas to keep the costs down. We  have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes. Inspections typically take place early in production including internal components which are reworked if not up to standard. Critical components are focused on to ensure key products are made correctly.
  • We also use the best possible materials in our products. Our clear floor hoists have stainless steel hydraulic lines and our four post hoists have 12+mm solid steel cables tested in Australian NATA registered laboratories. Our synchronisation cables are solid steel and safety latches are billet steel.
  • We apply the best designs from our business registered hoists into our home use hoists.  For example, all arms on the two post hoists have the 4T updates, and carriages have the bracing update specified by Australian Engineers for our business hoists.
  • We offer an ever increasing range of workshop items allowing customers to source extra items at low cost, many of these items are half the cost of other suppliers – just ask us to email you our catalogue.
  • This hoist is erected in Ormeau for you to view before placing an order.

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


HAPP25 high lift 4 post hoist - the whole process of purchasing, payment and pickup was easy and professional right the way through, great technical information for ease of what suited my needs to great administrative support, always pleasant profe... Happ25 4 post 4T car storage hoist with castor wheels – Glenn F, June 2023



Love it, so easy to use and unload by my self and my wife…very happy we both are..thank you, Mark MC25 – Motorbike hoist – Mark McCauley – April 16, 2018


Read More Reviews