happ clear floor 90/95
HAPP95

Hoist HAPP95 2 Post Free Standing Hoist, 1.75m Lift, Adjustable Width

$4,090.00

The HAPP95 is like nothing else on the market.  Great for home garage or small home workshops with all the features of our full sized lifts. It is a 2 post lift clear floor hoist low column.

The HAPP95 has no floor plate and no overhead beam, it is controlled hydraulically with 5m hoses from the pump to each column.  The hose can be disconnected when not in use and if you use drop in anchors you can easily move the columns to storage if desired.

The HAPP95 now ships with the latest HAPP generation 2 arms and carriage designs. This allows you achieve the best possible arm configuration. The HAPP95 has four 3 piece arms that have a wide range of movement from 580-1140mm. They can go shorter than most arms and longer that our previous longest arm giving you the ultimate in flexibility which combined with the ability to locate columns at any position enables you to set up your hoist exactly where you want it to be.

Available on backorder

Options

Large Base Floor Plate

GST INCLUSIVE AND INCLUDING THE BOLTS REQUIRED PLUS POSTAGE

The large base plate is exactly that… A big base plate for HAPP hoists. 2 will be sent each time.

If you are concerned about the ability of your concrete to support a Happ hoist this accessory may be the answer. The plate measures a whopping 700 x 700mm extending the contact area of the hoist by almost 4 times spreading the load over this large area.

Stabiliser Bars E4

GST INCLUSIVE PLUS POSTAGE

The HAPP E4 stabilizer bar provides extra front to back stability for HAPP hoists.

These are sold as a set of TWO.

Bundled product placeholder image

G2L Generation2 2x 2pc Long Arms

Bundled product placeholder image

G2S Generation2 2x 2pc Short Arms

Bundled product placeholder image

3 Phase Full Pump Assembly Upgrade

SKU: HAPP95 Categories: , ,

THIS HOIST IS GST INCLUSIVE AND HAS A FIVE YEAR STRUCTURAL WARRANTY

The HAPP95 columns are 2.4m high, if you want a smaller version the HAPP90 has 2m high columns.

You are in control of what distance you have between your columns. A great idea for those that don’t have a ‘normal’ sized car, or if you have height restrictions with your ceiling.

  • Automatic safety latch locking every 100mm in lift, checked by Australian professional engineers.
  • No extension of cylinders beyond the top of column as lift raises. The column height is the maximum height ever taken with the lift.
  • Carriage and arm designs checked by Australian professional registered engineers.
  • Design is unique worldwide to HAPP Australia.
  • Don’t buy a cheap imitation – this hoist has our full size hoist features in a compact design
  • 5 year structural warranty , 12 month manufacturer parts warranty see happ.com.au/warranty

Note: HAPP hoists come standard with steel oil containers, Plastic containers can be provided if so desired.

All HAPP hoists have ratchet safety latches in the columns, users only work with vehicles when the mechanical safety latches are engaged allowing safe work at any lift height. HAPP 95 lifting is controlled via a special flow control valve block.

FREE low profile ramps provided with all our 2 post car hoists.

Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


Re my happy hoist as I call it – purchased a happ 30p model. It is well made, a high quality product with full Australian compliance. Was easy to install and use and at a very competitive price to buy. Maree from Happ was very helpful in my decisio... Happ30P – Jim Ryan – May 19, 2020


Absolutely the best purchase I have made for my garage . Happ hoists are extremely helpful and the hoist is much better than I even expected. Pick up was easy and instalation was very simple.Finally an affordable high quality hoist is available . I be... HAPP30 – floor plate hoist – Dave Banks – June 3, 2018

Read More Reviews

Weight 550 kg
Dimensions 242 × 74 × 47 cm
Load Capacity

3000kgs
Lifting Height

1750mm – 1950mm using the spacers
Minimum Height

110mm
Overall Height

2400mm
Outside column

adjustable typically to 3400mm
Inside column

adjustable typically larger than 2400mm
Net Weight

550 kgs
Rise/Drop time

50s rise / 80s drop time
Power Pack

Yes, HAPP highest quality motor with aluminium motor and steel tank for robustness. The motor comes with a 15 amp industrial plug on a 1m lead to simplify installation.
Motor

240V, 15Amp
Power of motor

2.2kw
Integrated hose mount for storage when not in use

Yes
Hydraulic cylinders in each column

Yes
Rachet safety latches

Yes in each column, safe working at each 125 mm latch position. Latches are designed and tested to Australian Standards.
Two point safety release

Yes, once the latch is released it stays released until you lift again.
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


I am really happy with the hoist. It has made things so much more easier working on my cars. And a few others have appreciated it as well. Thank you  HAPP70 – WH&S floor plate 4T – John Hannett – June 12, 2016


I bought my mc30 for my mbike. No scrounging around on the floor MC30 bike lift – Andrew G, April 2024

Read More Reviews

  • We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.
  • We sell mainly by recommendation. To do this we  have personal and professional customer service;  we work with every customer to make sure they are happy with the products they purchase.
  • Imported products are typically assembled overseas to keep the costs down. We  have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes. Inspections typically take place early in production including internal components which are reworked if not up to standard. Critical components are focused on to ensure key products are made correctly.
  • We also use the best possible materials in our products. Our clear floor hoists have stainless steel hydraulic lines and our four post hoists have 12+mm solid steel cables tested in Australian NATA registered laboratories. Our synchronisation cables are solid steel and safety latches are billet steel.
  • We apply the best designs from our business registered hoists into our home use hoists.  For example, all arms on the two post hoists have the 4T updates, and carriages have the bracing update specified by Australian Engineers for our business hoists.
  • We offer an ever increasing range of workshop items allowing customers to source extra items at low cost, many of these items are half the cost of other suppliers – just ask us to email you our catalogue.
  • This hoist is erected in Ormeau for you to view before placing an order.
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


Love it, so easy to use and unload by my self and my wife…very happy we both are..thank you, Mark MC25 – Motorbike hoist – Mark McCauley – April 16, 2018


I contacted Gavan and he was more than helpful with all my many questions, and was happy to chat about various options. Placing my order with Jodie was a breeze and I had my hoist home quickly. Once I unpacked and installed the hoist, I realised just ... Steve Kolar – HAPP30P – 1900mm lift 2 post – March 6, 2020

Read More Reviews

People who bought this product also looked at..