Sale!
Scissor Lift HAPP12 3T Full Height Scissor Hoist
HAPP12, Prestige Detailing Studio
Scissor Lift HAPP12 3T Full Height Scissor Hoist
Scissor Lift HAPP12 3T Full Height Scissor Hoist
Scissor Lift HAPP12 3T Full Height Scissor Hoist
HAPP12

Scissor Lift HAPP12 3T Full Height Scissor Hoist

Original price was: $5,990.00.Current price is: $4,790.00.

GST INCLUSIVE AND COMES WITH A FIVE YEAR STRUCTURAL WARRANTY.

Designed for Australian Workshops

Professional engineers registered in Queensland tested and verified the HAPP 12 design against relevant Australian Standards. In addition, HAPP registered the verified design with Workplace Health and Safety for use in commercial workshops.

The HAPP 12 suits customers who need a full-rise scissor lift with clear access to the vehicle’s drivetrain. Therefore, mechanics can complete servicing and repair work more easily.

The lift also works well for mower workshops and home garages. For example, users can load large mowers from side to side. This position provides clear access to the blades and underside.

Key HAPP 12 Features

  • Full-rise lifting height of approximately 1,860 mm
  • Easy access to the vehicle’s drivetrain
  • Suitable for cars, large mowers and workshop equipment
  • Four anchor bolts secure each runway to the floor
  • Loading ramps can extend the lifting platform
  • Suitable for recessed or surface-mounted installation
  • Verified by professional engineers registered in Queensland
  • Registered for use in commercial workshops

Australian engineers used modern structural analysis tools to assess the lift. The coloured engineering images on this page show examples of this analysis.

The HAPP 12 uses four anchor bolts in each runway. As a result, the lift remains securely attached to the workshop floor.

Alternatively, customers can recess the lift into the floor. This option creates a smooth and level workshop surface when the lift is lowered. Customers considering this setup can view a recessed installation at our Willow Vale location.

The HAPP 12 reaches a lifting height of approximately 1,860 mm. Therefore, it lifts higher than many competing scissor lifts on the market. By comparison, most other HAPP lifts reach approximately 1,900 mm.

For vehicles with longer lifting-point distances, users can raise the loading ramps and use them as platform extensions. Once raised, the ramps sit level with the runways and provide extra lifting length.

Options

WHS Happ

WH&S Kit

SKU: HAPP12 Categories: , , , Tags: , ,

GST INCLUSIVE AND COMES WITH A FIVE YEAR STRUCTURAL WARRANTY.

The HAPP 12 scissor lift is suitable for a wide range of automotive maintenance and repair work. It reaches a full lifting height of 1.86 m and lowers to just 11 cm.

When not in use, the lift packs flat to help save valuable workshop space.

The HAPP 12 uses electronic solenoids to control the safety latches. As a result, it does not require a compressed-air connection. This makes installation simpler and everyday operation more convenient.

Most scissor-lift users prefer this electronic safety-latch system, because it is easy to use and requires fewer external connections.

Two sizes of lifting blocks are included. These blocks provide greater flexibility and suit a wide range of vehicle lifting points.

The high-quality control box manages both the lifting and safety-latch functions.

Protective shields cover the hydraulic hoses to help prevent accidental damage.

A heavy-duty industrial 15-amp plug is also included. It features an orange collar and a one-metre lead, making it easy to connect to a suitable extension lead.

5 year structural warranty, 12 month manufacturer parts warranty see happ.com.au/warranty

 

HAPP12 DetailingCollage

Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


Just thought I would drop you a line to say how impressed we are with the HAPP hoist, we have used it couple of times now and it just brings a smile to my son and I each time. Best thing EVER!! Thanks again, Steve. HAPP30 – floor plate 4T – Steve Lewis – December 5, 2017


Very happy with my hoist. Perfect for confined spaces. My roof is only 2200 high. Although I can’t stand under the cars I can sit under most with my back straight. It is amazing the advantages of not having jack stands on the floor (not to mention saf... HAPP90 – short column 2 post – Sam Palmer – November 15, 2019

Read More Reviews

Weight 890 kg
Dimensions 213 × 74 × 38 cm
Maximum Load Capacity

3000 Kg
Maximum Lifting Height

1850mm
Minimum Lifting Height

110mm
Width between runways

800mm
Outer dimensions (LxWxH)

2082 x 2100 x 180mm
Motor Capacity

240V, Single phase
Gross Weight

890kgs
Net Weight

841kgs
Fast Dual-cylinder dual scissor lifting system

Yes
Plastic powder coat finish

Yes
Packing dimensions of hoist

2130 x 735 x 375mm
Packing dims of control box

1140 x 425 x 485mm
Weight of control box

GW:47KG, NW:27KG
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


I like my hoist so much I re wrote the lyrics to Pharrell Williams ‘Happy’ song….just for fun. It might seem crazy what I’m about to saySunshine she’s here, you can take a breakI’m a hot air balloon that could go to spaceWith the air, like I don’t ... HAPP70 – Business hoist – James Lang – September 13, 2017


To all the crew at Happ Australia, I just wanted to compliment you all for the service provided to me, during the purchase of my new Happ35 hoist. I am extremely happy with the product, and the whole process from my initial enquiry right through to de... HAPP35 – Mark Baumann – floor plate hoist – June 26, 2018

Read More Reviews

  • We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.
  • We sell mainly by recommendation. To do this we  have personal and professional customer service;  we work with every customer to make sure they are happy with the products they purchase.
  • Imported products are typically assembled overseas to keep the costs down. We  have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes. Inspections typically take place early in production including internal components which are reworked if not up to standard. Critical components are focused on to ensure key products are made correctly.
  • We also use the best possible materials in our products. Our clear floor hoists have stainless steel hydraulic lines and our four post hoists have 12+mm solid steel cables tested in Australian NATA registered laboratories. Our synchronisation cables are solid steel and safety latches are billet steel.
  • We apply the best designs from our business registered hoists into our home use hoists.  For example, all arms on the two post hoists have the 4T updates, and carriages have the bracing update specified by Australian Engineers for our business hoists.
  • We offer an ever increasing range of workshop items allowing customers to source extra items at low cost, many of these items are half the cost of other suppliers – just ask us to email you our catalogue.
  • This hoist is erected in Ormeau for you to view before placing an order.
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


Happ hoists are very good value and they allowed me to purchase one of their products immediately on the day, which is not always possible with other companies. I picked up the Happ11A mid rise hoist with my own trailer and installed it in my shed ... Chet Parker – HAPP11A – midrise scissor lift – March 4, 2020


Thanks Maree and Gavan, as per attached pic Happ 40 hoist installed and works great.Blown gearbox was out of the son’s drift car in 20 minutes. Not one swear word was uttered! HAPP40 – WH&S approved clear floor hoist – Rob Venema – June 14, 2017

Read More Reviews

People who bought this product also looked at..