Sale!
HAPP60P

Hoist HAPP60P 4T Two Post, Dual pt safety, 1900mm Lift

$3,590.00

GST INCLUSIVE AND COMES WITH A THREE YEAR STRUCTURAL WARRANTY.

Great for home users wanting an economical clear floor hoist for occasional maintenance work on vehicles with a standards approved safe hoist or workshops wanting a more economical clear floor lift for occastional use, storage and holding vehicles that will hold a vehicle for long time duration work.

  • Australian Standards Tested and Certified
  • Robot welded Asynchronous Gen 2 Arms
  • Robot welded Column and Carriage
  • Robot folded Column
  • CNC machined parts
  • Ready for use in businesses
  • Workplace Health and safety registration kit available

Options

G2L Generation2 2x 2pc Long Arms

G2S Generation2 2x 2pc Short Arms

3 Phase Full Pump Assembly Upgrade

Stabiliser Bars E4

GST INCLUSIVE PLUS POSTAGE

The HAPP E4 stabilizer bar provides extra front to back stability for HAPP hoists.

These are sold as a set of TWO.

Large Base Floor Plate

GST INCLUSIVE AND INCLUDING THE BOLTS REQUIRED PLUS POSTAGE

The large base plate is exactly that… A big base plate for HAPP hoists. 2 will be sent each time.

If you are concerned about the ability of your concrete to support a Happ hoist this accessory may be the answer. The plate measures a whopping 700 x 700mm extending the contact area of the hoist by almost 4 times spreading the load over this large area.

SKU: HAPP60P Categories: , ,

THIS HOIST IS GST INCLUSIVE AND HAS A THREE YEAR STRUCTURAL WARRANTY

3Pc and 2Pc HAPP GEN2 precision Robot welded arms with extended range 580-1140mm and 890-1420mm. Enable easier centreing load of vehicles on columns especially large 4WD, these arms also allow easier access to doors as vehicle can be further back on lift.

  • Design components structurally analysed and tested to Australian Standards
  • 2 limit switches, one for over height as most clear floor lifts and a second inside the column to halt hydraulics before cylinder reaches full length avoiding over pressure scenarios extending cylinder seal life.
  • Control cables, hoses routed overhead
  • Over height protection with safety bar and limit switch
  • Column over pressure protection with limit switch protection in column maximises cylinder lifetime
  • 9.5mm all steel carriage synchronisation cables
  • Ratchet safety mechanism in both columns
  • Dual point safety release, once released stay released till you go up again
  • Carriages move synchronously, Dual Hydraulic cylinder drive, stable lifting and lowering
  • Dynamically tested with 125% of rated capacity and static test with 150% of rated capacity by HAPP to Australian Standards
  • 5mm thick columns
  • 16 mm thick base plate exceeds Australian Standards
  • 20mm Tru-bolt design anchor bolts
  • HAPP Screw up drop in pad design
  • Australian Standard tested arm locks exceed Australian Standards
  • Standard fitted industrial plug on 1m fly lead minimised connection effort
  • 4 amp fusible link on limit switch wiring minimise chance of  wire burnout or shock if wiring is damaged
  • Double insulation on all limit switch wiring with easy to assembly plugs per Australian Standards.
  • 3” + 6” spacers standard
  • Highest quality Aluminium Bucher powered pump assembly
  • 3 year structural warranty , 12 month manufacturer parts warranty see happ.com.au/warranty
Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


My friend bought one of your hoists 2 years ago. It was delivered to the Yorke Peninsula South Australia. We have used it many times. I use the cap and stubbie cooler quite often. Cheers Ray HAPP40 – Ray Moody – business approved clear floor – March 13, 2019



I like my hoist so much I re wrote the lyrics to Pharrell Williams ‘Happy’ song….just for fun. It might seem crazy what I’m about to saySunshine she’s here, you can take a breakI’m a hot air balloon that could go to spaceWith the air, like I don’t ... HAPP70 – Business hoist – James Lang – September 13, 2017


Read More Reviews

Weight 718 kg
Dimensions 385 × 50 × 74 cm
Safe Working Load (SWL)

4000kgs

Lifting Height

1900mm

Overall Height

3680mm

Overall Width

3446mm

Width between pillars

2850mm

Net Weight

700kgs

Rise/Drop time

50s rise / 80s drop time

Hydraulic Power Pack

Yes

Motor

240V, 15Amp, Single phase or 3 Phase 415V (3 phase motor is an additional $150)

Power of motor

2.2kw

Two point safety release (Single point safety release available see HAPP 40)

Yes

Lifting system

electric hydraulic pump to cylincers in each column with chain over yoke from carriage to column

Carriage synchronisation

2 x 9.5mm all steel cables routed between carriages

Safety locks

Ratchet safety mechanism, tested to Australian Standards with specific steel grades

Min pad height

100mm

Finish

Powder coating

Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


Just a quick message to say thank you for your prompt and efficient service. We got our Tyre Machine and Wheel Balancer on the day you said and we put it straight into action the following day, I can proudly say that these machines have now already fi... Tyre Changer/Wheel Balancer – Peter Nikic – May 30, 2015



It is the best tool (big) I have ever bought, and Maree from Happ is a really nice person to deal with and this company has one of the highest moral beliefs and behaviour that I have ever come across. They will shift heaven and earth to make you more... HAPP35 – 2 post floor plate hoist – Jeffrey Hepenstall – June 10, 2012


Read More Reviews

  • We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.
  • We sell mainly by recommendation. To do this we  have personal and professional customer service;  we work with every customer to make sure they are happy with the products they purchase.
  • Imported products are typically assembled overseas to keep the costs down. We  have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes. Inspections typically take place early in production including internal components which are reworked if not up to standard. Critical components are focused on to ensure key products are made correctly.
  • We also use the best possible materials in our products. Our clear floor hoists have stainless steel hydraulic lines and our four post hoists have 12+mm solid steel cables tested in Australian NATA registered laboratories. Our synchronisation cables are solid steel and safety latches are billet steel.
  • We apply the best designs from our business registered hoists into our home use hoists.  For example, all arms on the two post hoists have the 4T updates, and carriages have the bracing update specified by Australian Engineers for our business hoists.
  • We offer an ever increasing range of workshop items allowing customers to source extra items at low cost, many of these items are half the cost of other suppliers – just ask us to email you our catalogue.
  • This hoist is erected in Ormeau for you to view before placing an order.
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


I’ve had my 4T Happ hoist 3 years now and am very happy with it’s performance and the service I received from Maree and the team at Happ hoists.It gets used quite often with 4 cars in our family. From services to tyre rotations, it makes the job so si... HAPP70 – WH&S floor plate – Mark Stewart – May 25, 2016



Finally got it commissioned! I absolutely love love love it, everything Is perfect. Best purchase ever.If anyone is in the market for a hoist contact Maree  or Gavan @happ hoists! They are the best to deal with, and will do an... HAPP30 – floor plate hoist – Anthony Burke – April 14, 2015


Read More Reviews