Hoist HAPP80P (70P E) 4.5T 2 Post Floor Plate, 1900mm Lift

THIS HOIST IS GST INCLUSIVE AND HAS A FIVE YEAR STRUCTURAL WARRANTY

This hoist is designed, tested  and verified to Australian standards at 4.5T SWL by Queensland professional engineers. The verified design is registered with WH&S for workshop use.

The HAPP80P (70P E) two post floor plate hoist, with single point release is ideal for workshops, race car drivers and home enthusiasts.  The single point release enables operation of all functions from one place.

The  80P has the same functionality as the 70P with addittion of fully electronic operation, hence the name 70P(E).  Some may question reliability of electronic control. The electronics used in the 80P are very high quality and reliable, we have never had to replace the electronic controls on the 80P.

Often referred to as the lazy mans hoist, the hoist can operate in fully automatic mode with one button for up and one for down, the lift does the rest.

The HAPP80P has two latches in each column (4 in total) which was controlled by cables in earlier models, we now use electronic solenoids to do this as we have found the solenoids to be extremely reliable and simple eliminating the need to manage cable releases on so many latches.

The HAPP80P has a button to hold latches out like the HAPP70P so you can control lowering directly.

The HAPP80P has  our latest designs standard in the package, some of  the other features included are:

• Over pressure limit switch inside the column to eliminate high pressure on seals
• Removable carriage nylon blocks without removing column provides easy maintenance
• Fully Australian Standard wiring (double insulation of limit switch wires, 4 amp fuseable link on limit switch wires, industrial plug on 1m fly lead for power)
• Screw in drop in pads with 3″ and 6″ adaptors
• The latest Generation2 asymmetric  arms and carriage design, 2 short 580-1140 and 890-1420 to enable the widest variety of vehicles to be loaded.
• All structurally designed and analysed using the latest computer design capabilities and robot manufacturing
• 160mmx20mm tru bolts for maximum locking to concrete out of mechanical anchors (chemical fasteners are better if you have access to an experienced operator)
• 5 year structural warranty , 12 month manufacturer parts warranty see happ.com.au/warranty

Note: The sizing of arms and carriage design looks identical to the 4T models, the 80P uses higher grade steel to handle the 4.5T load rating.

The screw in pad allows for ease of adjustment and the drop in style allows you to add in spacers to reach those unusual contact points. It is also a multi levelled screw in pad, giving you more height if required. We have also included 2″ and 4″ spacers at no extra charge.

We also supply a two point release version (HAPP30P) and a two point release shorter version (HAPP35P).  The HAPP 80P provides similar functionality to the HAPP70P but also allows for up and down operations with just one button press for each way.

Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.