HAPP30P

Hoist HAPP30P 4T 2 Post Floor Plate , 1.9m Lift

$3,490.00

GST INCLUSIVE AND COMES WITH A FIVE YEAR STRUCTURAL WARRANTY.

The best Australian Standards designs developed in Queensland for Australians, built by mostly Robots in one of the worlds most advanced factories and registered with Workplace Health and Safety.

The HAPP30P two post floor plate hoist, with hydraulic lift is ideal for home enthusiasts that want maximum lift height and support for those unusual sized vehicles with our GEN 2 arms. This lift has a 2 point manual release mechanism. We also supply a single point release version (HAPP 70P) narrower and lower version (HAPP 35P) .

The HAPP30P two post floor plate hoist, with hydraulic lift is ideal for home enthusiasts that want maximum lift height and support for those unusual sized vehicles with our GEN 2 arms.  This lift has a 2 point manual release mechanism. We also supply a single point release version (HAPP 70P) narrower and lower version (HAPP 35P)

Options

Large Base Floor Plate

GST INCLUSIVE AND INCLUDING THE BOLTS REQUIRED PLUS POSTAGE

The large base plate is exactly that… A big base plate for HAPP hoists. 2 will be sent each time.

If you are concerned about the ability of your concrete to support a Happ hoist this accessory may be the answer. The plate measures a whopping 700 x 700mm extending the contact area of the hoist by almost 4 times spreading the load over this large area.

Stabiliser Bars E4

GST INCLUSIVE PLUS POSTAGE

The HAPP E4 stabilizer bar provides extra front to back stability for HAPP hoists.

These are sold as a set of TWO.

Bundled product placeholder image

G2L Generation2 2x 2pc Long Arms

Bundled product placeholder image

G2S Generation2 2x 2pc Short Arms

Bundled product placeholder image

WH&S Kit

Bundled product placeholder image

3 Phase Full Pump Assembly Upgrade

SKU: HAPP30P Categories: , ,

THIS HOIST IS GST INCLUSIVE AND HAS A FIVE YEAR STRUCTURAL WARRANTY

This hoist is designed, tested  and verified to Australian standards at 4T SWL by Queensland professional engineers. The verified design is registered with WH&S for workshop use.

Some of  the other features included are:

  • Over pressure limit switch inside the column to eliminate high pressure on seals
  • Removable carriage nylon blocks without removing column provides easy maintenance
  • Fully Australian Standard wiring (double insulation of limit switch wires, 4 amp fusible link on limit switch wires, industrial plug on 1m fly lead for power)
  • Screw in drop in pads with 2″ and 4″ adaptors
  • The latest Generation 2 arms and carriage designs
  • All structurally designed and analysed using the latest computer design capabilities and robot manufacturing
  • 160mmx20mm Tru bolts for maximum locking to concrete out of mechanical anchors (chemical fasteners are better if you have access to an experienced operator)

The screw in pad allows for ease of adjustment and the drop in style allows you to add in spacers to reach those unusual contact points. It is also a multi levelled screw in pad, giving you more height if required. We have also included 2″ and 4″ spacers at no extra charge.

As our customers realise, there are certain advantages to both a screw in and drop in pad design.  We have worked with the manufacturing plant and now offer as a standard inclusion on all our hoists, a drop in/screw in pad.  The screw in pad allows for ease of adjustment and the drop in style allows you to add in spacers to reach those unusual contact points.  It is also a multi levelled screw in pad, giving you more height if required.  We have also included 3″ and 6″ spacers at no extra charge.

FREE low profile ramps provided with all our 2 post car hoists.

5 year structural warranty , 12 month manufacturer parts warranty see happ.com.au/warranty

Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


Very happy customer. Ordered and payed early one day, arrived the next day. Travelled 1200k with tracking number with clear instructions. HAPP30 – Quentin Edwards – floor plate – February 8, 2018


WE PURCHASED A HAPP40P TWO POST LIFT FOR USE IN MY SON'S SHED FOR OUR PERSONAL USE, VERY HAPPY WITH THE OUT COME, WE FOUND THE HAPP PEOPLE VERY HELPFUL, COULD NOT BE HAPPIER. Happ40P 2 post 4T clear floor – Cheryl Lewis, June 2021

Read More Reviews

Weight 620 kg
Dimensions 285 × 76 × 55 cm
Load Capacity

4000kgs
Lifting Height

1900mm
Overall Height

2826mm
Overall Width

3446mm
Drive through

2480mm
Width between pillars

2850mm
Rise/Drop time

50s rise / 20s drop time
Net weight

600kg
CE approved Hydraulic Power Pack

Yes
Motor Capacity

240V, Single phase
Power of motor

2.2kw
Two point safety release

Yes
Fast Dual-cylinder lifting system

Yes
Chain-driven system

Yes
Cable and hydraulic load balancing

Yes
Automatic safety locks

Yes
Cable-equalization system

Yes
Min pad height

107mm
Plastic powder coat finish

Yes
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


Hey guys just an update cable is in and hoist is all set up. A big thank you again to you guys but I have to give a extra special thanks to Maree; your professionalism throughout the whole time I have dealt with you guys has been outstanding. I will b... HAPP25 – 4 post 4T AS Compliance hoist – Merrick Tuck – September 2, 2018


Recently purchased and installed my Happ hoist, purchase and pick up was an absolute breeze. Assembly and install was equally as easy.Maree and the team were extremely helpful all the way though the process. Thanks guys I love it HAPP40 – clear floor 4T hoist – 1900mm lift – Rob Ensing – June 10, 2019

Read More Reviews

  • We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.
  • We sell mainly by recommendation. To do this we  have personal and professional customer service;  we work with every customer to make sure they are happy with the products they purchase.
  • Imported products are typically assembled overseas to keep the costs down. We  have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes. Inspections typically take place early in production including internal components which are reworked if not up to standard. Critical components are focused on to ensure key products are made correctly.
  • We also use the best possible materials in our products. Our clear floor hoists have stainless steel hydraulic lines and our four post hoists have 12+mm solid steel cables tested in Australian NATA registered laboratories. Our synchronisation cables are solid steel and safety latches are billet steel.
  • We apply the best designs from our business registered hoists into our home use hoists.  For example, all arms on the two post hoists have the 4T updates, and carriages have the bracing update specified by Australian Engineers for our business hoists.
  • We offer an ever increasing range of workshop items allowing customers to source extra items at low cost, many of these items are half the cost of other suppliers – just ask us to email you our catalogue.
  • This hoist is erected in Ormeau for you to view before placing an order.
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


I received my MC35 motorcycle lift and MC20 centre lift a week ago and I have to say I am very happy with the quality and finish of the products. The lift is of great quality materials and has no apparent burrs or sharp points often associated w... Prolift MC35 Happ Motorbike LIFT – Tony W, Sep 2024


Recently purchased and installed my Happ hoist, purchase and pick up was an absolute breeze. Assembly and install was equally as easy.Maree and the team were extremely helpful all the way though the process. Thanks guys I love it HAPP40 – clear floor 4T hoist – 1900mm lift – Rob Ensing – June 10, 2019

Read More Reviews

People who bought this product also looked at..