Combo WB20/TC20 Save $580

Combo WB20/TC20 Save $580

The TC20 is our most common tyre machine for workshops who don’t require air jets in jaws from TC20A and TC30

Check out the spec sheet link [click here] to see a comparison of all tyre changer and wheel balancer models.

Don’t forget – the right assist arm (RAA) which is commonly used with tilt post tyre machines dealing with; – low profile tyres and hard walled tyres such as run flats, 4WD.

TC20 tyre changer:

The front pedal console is a removeable pedal box. The pedal box can be accessed by removing the side panel for small adjustments like adjusting the tilt speed of the post (on the outside valve block). If more detailed inspection or maintenance is required the entire pedal box can be slid out after undoing 4 allen bolts and a locating bolt.

The inflator has a gauge mounted on the post and an air hose connection that is operated via a foot pedal on the side of machine or moved out from machine if desired providing maximum flexibility and ease of use.

The duck bill head has plastic rim protectors, the bead breaker has a plastic protectors and the jaws with plastic protectors to ensure minimum chances to damage a rim.

Motorbike and quad wheels can easily be worked on using the optional motorbike adaptors.

The unit comes with spare plastic protectors for the head and a tyre leaver.

WB20 wheel balancer:

For regular wheel balancing. There are 3 main measurements that must be provided to the machine depending on the type of wheel being balanced.
A – Distance from machine to edge of inside where wheel weights are to be added on inside of weights added on inside of rim
B – Width of rim if weights are added to outside of rim
D – The diameter or rim

The wb20 has the ability to automatically calculate the data values for the A and D values using the pointer that moves out from the machine, it also is smart enough to detect most operating modes and select the mode ready to balance when you lower the wheel hood.

It also has a laser pointer which  is active in ALU5 model and points exactly to the position on the wheel to add the weights.

Customers advise these features make the HAPP WB20 one of the most efficient wheel balancers of wheels, especially aluminium wheels available today.

Motorbike wheels can be balanced using the optionA motorbike adaptor which has special clamps to avoid any damage to wheels or bearings.

If you want even more details see the WB20 and TC20 product pages or contact Happ customer service.

WB20, A&D Auto

Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.