Padding Plate (for floor plate hoists)

GST INCLUSIVE AND COMES WITH A FIVE YEAR STRUCTURAL WARRANTY.

The best Australian Standards designs developed in Queensland for Australians, built by mostly Robots in one of the worlds most advanced factories and registered with Workplace Health and Safety.

The HAPP30P two post floor plate hoist, with hydraulic lift is ideal for home enthusiasts that want maximum lift height and support for those unusual sized vehicles with our GEN 2 arms. This lift has a 2 point manual release mechanism. We also supply a single point release version (HAPP 70P) narrower and lower version (HAPP 35P) .

HAPP30P SPECS – SWL: 4 Tonne, Drive Through Width: 2.55m, Column Height: 2.83m, Column Width: 3.45m, Safety Release: Dual, Lift: 1.92-2.095m.

GST INCLUSIVE AND COMES WITH A FIVE YEAR STRUCTURAL WARRANTY.

Built to Australian Standards in Queensland for Australian conditions. Manufactured primarily by robotic systems in one of the world's most advanced factories and registered with Workplace Health and Safety.

With its low 2.726 m column height, the HAPP35P is the ideal solution for workshops with limited ceiling height while still providing excellent lifting performance.

The HAPP35P two-post floor plate hoist features a hydraulic lifting system and is perfect for home enthusiasts who want maximum lifting capability without the ceiling height required for our taller HAPP floor plate models (which typically have 2.84 m columns). Our GEN 2 lifting arms provide excellent support for a wide range of vehicle sizes, including vehicles that are difficult to lift with conventional hoists.

The HAPP35P comes standard with a two-point manual safety release system. If you prefer a single-point release, the HAPP70P is also available.

For even lower ceiling heights, consider the HAPP95 with 2.4 m columns or the HAPP90 with 2.0 m columns.

The HAPP35P shares the same proven design as the HAPP30P but features columns that are 100 mm shorter (2.726 m compared with 2.84 m). This reduces the maximum lifting height from 1900 mm to 1800 mm. It also has a slightly narrower overall width, making it a popular choice for customers with tighter workshop spaces.

View the Happ35P Spec Sheet [click PDF link]

HAPP35P SPECS – SWL: 4 Tonne, Drive Through Width: 2.44m, Column Height: 2.73m, Column Width: 3.33m, Safety Release: Dual, Lift: 1.82-1.995m.

GST INCLUSIVE AND COMES WITH A FIVE YEAR STRUCTURAL WARRANTY.

The best Australian Standards designs developed in Queensland for Australians, built by mostly Robots in one of worlds most advanced factories, and registered with Workplace Health and Safety.

The HAPP70P two post floor plate hoist, with single point release is ideal for workshops, race car drivers and home enthusiasts. The single point release enables operation of all functions from one place. The lift uses a manual lever for downward operation to provide maximum control.

The 70P has two latches in each column (4 in total) which was controlled by cables in earlier models, we now use electronic solenoids to do this as we have found the solenoids to be extremely reliable and simple eliminating the need to manage cable releases on so many latches.

The 70P has our latest designs standard in the package, some of the features include:

• Latest Generation 2 arms* and carriage design
• Over-pressure limit switch (inside the column to eliminate high pressure on seals)
• Easy-maintenance removable carriage nylon blocks
• Fully Australian Standards compliant wiring
• Screw-in drop-in pads with 70mm & 100mm adaptors/spacers included
• The screw in pad allows for ease of adjustment and the drop in style allows you to add in spacers to reach those unusual contact points. It is also a multi levelled screw in pad, giving you more height if required.
• Computer-engineered, robot-manufactured construction
• 160 × 20mm Tru-Bolts supplied for secure anchoring (chemical fasteners are better if you have access to an experienced operator)
• 5-year structural warranty + 12-month parts warranty
• Multi-level adjustable lifting pads suit a wide range of vehicles
• Also available as 2-point release (HAPP30P), shorter HAPP35P, and one-touch HAPP80P
• FREE low-profile ramps included with all 2-post hoists
• Fully Australian Standard wiring (double insulation of limit switch wires, 4 amp fusible link on limit switch wires, industrial plug on 1m fly lead for power)

HAPP70P SPECS – SWL: 4.5 Tonne, Drive Through Width: 2.55m, Column Height: 2.83m, Column Width: 3.45m, Safety Release: Single, Lift: 1.9-1.975m.