Sale!
HAPP45P

Hoist HAPP45P 4.5T 2 Post Direct drive Electric – Hydraulic Lift

Original price was: $4,490.00.Current price is: $3,900.00.

HAPP45P 4.5T, 2 Post Direct drive Electric – Hydraulic Lift

The HAPP 45P provides a huge 4.5T lift capacity with a high 3.729 height to the safety bar which can be extended with 300 or 600mm extensions.

Hydraulic ram rod pushes on top of carriage with cylinder casing on bottom.  If you are welding underneath vehicles this lift will minimise chance of weld splatter hitting damaging the cylinder rods. If you dont have this use and want to protect against moisture ingress look at HAPP 45Pi.

The arms are the latest Generation 2 design, arms and carriage use higher grade steel for extra load rating.  Good for workshops and project / race car users who will use the lift frequently and have a wide variety of vehicles to lift including 4WDs with uneven load distribution.

You can load small / light vehicles from either direction, medium weight and larger vehicles can be loaded from both directions by swapping arms from front to back.

Available on backorder

Options

WH&S Kit

45P/Pi 300mm Extension Kit

45P/Pi 600mm Extension Kit

Stabiliser Bars E4

GST INCLUSIVE PLUS POSTAGE

The HAPP E4 stabilizer bar provides extra front to back stability for HAPP hoists.

These are sold as a set of TWO.

Large Base Floor Plate

GST INCLUSIVE AND INCLUDING THE BOLTS REQUIRED PLUS POSTAGE

The large base plate is exactly that… A big base plate for HAPP hoists. 2 will be sent each time.

If you are concerned about the ability of your concrete to support a Happ hoist this accessory may be the answer. The plate measures a whopping 700 x 700mm extending the contact area of the hoist by almost 4 times spreading the load over this large area.

3 Phase Full Pump Assembly Upgrade

G2S Generation2 2x 2pc Short Arms

G2L Generation2 2x 2pc Long Arms

SKU: HAPP45P Categories: , ,

THIS HOIST IS GST INCLUSIVE AND HAS A FIVE YEAR STRUCTURAL WARRANTY

HAPP45P 4.5T 2 Post Direct drive Electric – Hydraulic Lift

This hoist is designed, tested  and verified to Australian standards at 4T SWL by Queensland professional RPEQ engineers. The verified design is registered with WH&S for workshop use.

Other features are:

  • Robot welded Asynchronous Gen 2 Arms, Column and Carriage
  • Robot folded Column
  • 2 limit switches, one for over height as most clear floor lifts and a second inside the column to halt hydraulics before cylinder reaches full length avoiding over pressure scenarios extending cylinder seal life.
  • Direct drive cylinders – less moving parts, better for those welding and grinding under vehicle
  • CNC controlled laser, milling and water jet cutting machined parts
  • Ready for use in businesses, Workplace Health and safety registration kit available
  • Release both column safeties from single point
  • Control cables, hoses routed overhead
  • Over height protection with limit switch on top cross bar
  • Cylinder over pressure protection with limit switch inside column
  • Carriages move synchronously, Dual Hydraulic cylinder drive, stable lifting and lowering
  • Structurally tested in Queensland on computer simulation with 125% of rated capacity and static test with 150% of rated capacity by HAPP to Australian Standards
  • Australian and New Zealand Standards AS/NZS designed, tested and certified
  • 5mm thick columns, 16 mm thick base plate, 20mm Tru-bolt design anchor bolts
  • HAPP two stage Screw up drop in pad design give best of drop in  using spacers and screw up pad design
  • Australian Standards tested arm locks, 3” + 6” spacers standard
  • Double insulated wiring  with 4amp fuse and plugs for all limit switch wiring exceeding Australian Standards requirements
  • M20 160mm Tru-bolt anchor bolts standard
  • The 45Pi uses ISO 32 grade hydraulic oil in its direct drive cylinders.
  • Industrial 15amp plug on 1m lead standard
  • 12 month manufacturer parts warranty, 5 year structural warranty see happ.com.au/warranty
Important: EVERY HAPP car lift design is tested in Queensland by Australian Professional engineers against Australian Standards using state of the art technology!!!! The multi coloured pictures on our lift specs are snippets from the engineers report that PROVES that we are doing this. We are the leaders in quality, if you do not see this drawing on your product, it is NOT tested to Australian Standards.
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


I purchased a HAPP 90 hoist off your company 12 months ago. Prior to the purchase you were very helpful in answering all my questions which made the decision to purchase easy. As I had limited height a full height hoist was not possible but your HAPP ... HAPP90 – portable 2 post – Steve Durrington – April 10, 2016



In addition to top quality hoists (HAPP 12 in my case) I experienced truly personalised service. An example of which is HAPP's door to door shipment assistance. This was faultless to say the least. If you're trying to decide whether to get a hoist or n... Happ12 full rise scissor lift – Brook Porter, May 2023


Read More Reviews

Weight 786 kg
Dimensions 385 × 50 × 74 cm
Lifting Capacity

Aus Std SWL 4500kg

Lift Height

1920–2120mm (with pads)

Min pad height

100mm

Overall height

3904mm

Overall Width

34300mm

Width between pillars

2850mm

Lifting Time

40-70s

CE approved Hydraulic Power Pack

Yes

Motor Power

2.2kw

Plastic powder coat finish

Yes

Power Supply

3-415v/50hz 1-240v/50hz15Amp

Power oil pressure

20Mpa

Gross weight

720kgs

Net Weight

689kg

Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


I purchased a happ40 from HAPP. They were fantastic to deal with and answered all my queries. Hoist works flawlessly and price was very reasonable. (misso didnt even complain) Will definitely be back for more gear for the workshop in the future. Alan Griffith – HAPP40 – 4T 2 post clear floor Business hoist – November 24, 2018



Excellent customer service nothing was a problem and such a great product. I bought a HAPP 30 for my shed along with an engine stand, and engine crane. Great quality and a great price! HAPP30 – wider drive through – Ray Henderson – May 20, 2019


Read More Reviews

  • We are an Australian owned and operated company with a focus on the best possible quality for reasonable prices.
  • We sell mainly by recommendation. To do this we  have personal and professional customer service;  we work with every customer to make sure they are happy with the products they purchase.
  • Imported products are typically assembled overseas to keep the costs down. We  have a Qualified Mechanical engineer working for us in China and other engineering inspection companies engaged that inspect our products and partner companies’ quality processes. Inspections typically take place early in production including internal components which are reworked if not up to standard. Critical components are focused on to ensure key products are made correctly.
  • We also use the best possible materials in our products. Our clear floor hoists have stainless steel hydraulic lines and our four post hoists have 12+mm solid steel cables tested in Australian NATA registered laboratories. Our synchronisation cables are solid steel and safety latches are billet steel.
  • We apply the best designs from our business registered hoists into our home use hoists.  For example, all arms on the two post hoists have the 4T updates, and carriages have the bracing update specified by Australian Engineers for our business hoists.
  • We offer an ever increasing range of workshop items allowing customers to source extra items at low cost, many of these items are half the cost of other suppliers – just ask us to email you our catalogue.
  • This hoist is erected in Ormeau for you to view before placing an order.
Download Spec Sheet

Contact Us

About Happ HAPP is a Company created by car enthusiasts for car enthusiasts. Car clubs asked us to change the game and we did. We take our job seriously and will only offer you the best products that we can source. We have sold hoists all across Australia. Our prices are the best, with quality and service assured.


Very helpful, great to deal with. The hoist i bought is fantastic. If i could give HAPP 10 stars i would. When i win the lotto these guys are going to outfit my megashed. 10/10 A++++ Josh Neumann – HAPP30 – dual point floor plate – March 5, 2020



Late last year I bought a Happ hoist through the lovely ladies at Happ Australia. The whole process from deciding which hoist best suited my needs, to it being unloaded at my property was smooth sailing. Freight and everything was organised for me. Ma... Chris Kafer – HAPP30 – 2 post floor plate model – March 3, 2020


Read More Reviews